Hytera PDC680 User Manual

52

Tap , tap
Alarms
, and then tap
Man down
.

Press the preprogrammed
Man down
key.

This feature is applicable only to radios that support the Emergency Alarm feature.

This feature is configured by your dealer.
13.4 Lone Worker
The Lone Worker feature allows the radio to automatically send an emergency alarm to your companion or the
control center in either of the following scenarios:

You do not operate the radio within the preset time.

The radio does not transmit voice within the preset time.
You can press any keys, rotate
Smart Knob
, or press the
PTT
key and speak to exit the emergency mode.
To enable this feature, do either of the following:

Tap , tap
Alarms
, and then tap
Lone worker
.

Press the preprogrammed
Lone worker
key.

This feature is applicable only to radios that support the Emergency Alarm feature.

This feature is configured by your dealer.
13.5 Stun, Revive, and Kill
The features are configured by your dealer.
Conventional Mode
The Stun feature allows you to deprive of all functions of the radio, excluding registration, authentication, reviving,
killing, and GPS polling. The Revive feature allows you to recover all functions of the radio.
To enable this feature, do either of the following:

Do as follows:
a.
Tap or .
b.
Go to
Contacts
>
Private
, and then tap a contact.
c.
In the contact details interface, enable the Stun or Revive feature.

Hytera PDC680 Specifications

General

Brand	Hytera
Model	PDC680
Category	Radio
Language	English