Hytera PDC680 - 16 Advanced PMR Features; Scan;Hunt; Conventional Mode; Trunking Mode

73
16. Advanced PMR Features
16.1 Scan/Hunt
The Scan/Hunt feature allows you to listen to activities on other channels, keeping track of your team members.
16.1.1 Conventional Mode
Enabling the Scan Feature

Swipe down from the top to enter the control and notification center, and then tap .

Press the preprogrammed
Scan
key.

Tap , and then enable
Scan
.

Switch to the channel configured with the Auto Scan feature.

With this feature enabled, the radio searches the scan list and stays on an active channel.
If you do not want to hear activities on a channel, press the preprogrammed
Nuisance delete
key to
temporarily remove the channel from the scan list.
Setting the Scan List
The scan list is a list of analog and digital channels that the radio scans.
1.
Tap or .
2.
Tap
Zone
, and then select the channel.
3.
Tap to edit the scan list.
16.1.2 Trunking Mode
Pre-registration Hunt
Before registering, the radio hunts through the control channels for available BSs. The hunting plans include Fixed
Trunking Station Control Channel (Fixed TSCC) and Flexible Trunking Station Control Channel (Flexible TSCC). If
the radio has unified frequency plans, it uses the Fixed TSCC; otherwise, it uses the Flexible TSCC. With the Fixed
TSCC preset, you can select one of the following hunt modes.
Hunt Mode
Description
Operation
Short Hunt
This feature allows the radio to hunt the fixed TSCC in the
defined hunt list.
Tap , go to
Scan
>
Hunt mode
, and then
select short hunt,
Comprehensive
This feature allows the radio to hunt all the channels within the