Hytera PDC680 - 8 Calls; PMR Calls; Group Call

27
8. Calls
8.1 PMR Calls
 In trunking mode, if the radio is not registered or attached, you cannot initiate a call.
 In trunking mode, you can initiate a call by entering an ID complying with the dialing rules. For details,
consult your dealer.
 The All Call feature, Broadcast Call feature, and Include Call feature are enabled by your dealer.
8.1.1 Group Call
A
group call is a call from an individual user in a group to all the other members in the group.
8.1.1.1 Initiating a Group Call
Through Preset Contact
1.
Press and then rotate the
Smart Knob
to select the channel or group contact.
2.
Press and hold the
PTT
key.
Through Manual Dialing
1.
Tap .
2.
On the dialpad, enter the group ID.
3.
Do either of the following:

In conventional mode, tap , and then tap
Group
.

In trunking mode, tap .
4.
Press the
PTT
key.
Through Contact List
1.
Tap or .
2.
Go to
Contacts
>
Group
, and then tap a group contact.
3.
Press and hold the
PTT
key, or tap .
Through One Touch Call
With the One Touch Call feature enabled, do either of the following:

In conventional mode, press the preprogrammed
One touch call/msg
key, and then press the
PTT
key.

In trunking mode, press the preprogrammed
One touch call/msg
key.