Hytera PDC680 User Manual

32
8.1.5.1 Initiating a PSTN/PABX Call
Through Contact List
1.
Tap or .
2.
Go to
Contacts
>
Private
.
3.
Tap the PSTN/PABX contact.
4.
Press the
PTT
key.
Through Manual Dialing
1.
Tap .
2.
On the dialpad, enter the PSTN/PABX ID complying with the dialing rules.
3.
Tap , and then tap
PSTN
or
PABX
.
4.
Press the
PTT
key.
Through One Touch Call
With the One Touch Call feature enabled, press the preprogrammed
One touch call/msg
key.
8.1.5.2 Receiving a PSTN/PABX Call
You can answer a PSTN/PABX call without any operation.
8.1.5.3 Ending a PSTN/PABX Call
A PSTN/PABX call ends in one of the following cases:

The calling or called party taps or presses .

The call duration exceeds the preset time.

The BS signal is lost.

A pre-emptive call or an emergency call occupies the channel.

With the Clear Down feature enabled, the calling or called party changes the contact.
8.1.6 Include Call (Trunking Only)
An include call is a special group call during which another group is invited within the call hang time. An include
call has the same Talk Priority and Clear Down feature as a group call.
To initiate an include call, do as follows:
1.
Initiate a group call. For details, see 8.1.1.1 Initiating a Group Call.
2.
Tap or , tap the group contact, and then tap .

Hytera PDC680 Specifications

General

Brand	Hytera
Model	PDC680
Category	Radio
Language	English