Hytera PDC680 User Manual

31

The preset transmission time of the calling party expires.

The call duration exceeds the preset time.

The BS signal is lost.

With the Clear Down feature enabled, the calling party changes the contact.
8.1.4 Broadcast Call (Trunking Only)
A broadcast call is a special group call.
In a broadcast call, only the calling party can speak.
8.1.4.1 Initiating a Broadcast Call
Through Contact List
1.
Tap or .
2.
Go to
Contacts
>
Group
, and then tap the group contact.
3.
Tap .
Through One Touch Call
With the One Touch Call feature enabled, press the preprogrammed
One touch call/msg
key.
8.1.4.2 Receiving a Broadcast Call
You can answer a broadcast call without any operation.
8.1.4.3 Ending a Broadcast Call
A broadcast call ends in one of the following cases:

The calling party taps or presses .
The called party can do so to exit the call, and can rejoin the call later.

The call duration exceeds the preset time.

The BS signal is lost.

A pre-emptive call or an emergency call occupies the channel.

With the Clear Down feature enabled, the calling party changes the contact.
8.1.5 PSTN/PABX Call (Trunking Only)
A PSTN/PABX call is a call initiated through the wired telephone network.

PSTN: Public Switched Telephone Network

PABX: Private Automatic Branch Exchange

Hytera PDC680 Specifications

General

Brand	Hytera
Model	PDC680
Category	Radio
Language	English