Hytera PDC680 User Manual

28
8.1.1.2 Receiving a Group Call
You can answer a group call without any operation.
8.1.1.3 Ending a Group Call
Conventional Mode
A group call automatically ends when the call hang time expires.
Trunking Mode
A group call ends in one of the following cases:

The calling party taps or presses the key.
The called party can do so to exit the call, and can rejoin the call later.

The call hang time expires.

The call duration exceeds the preset time.

The BS signal is lost.

A pre-emptive call or an emergency call occupies the channel.

With the Clear Down feature enabled, the calling party changes the contact.
8.1.2 Private Call
A private call is a call from an individual user to another individual user.
8.1.2.1 Initiating a Private Call
Through Preset Contact
1.
Press and then rotate the
Smart Knob
to select the channel or private contact.
2.
Press and hold the
PTT
key.
Through Manual Dialing
1.
Tap .
2.
On the dialpad, enter the private ID complying with the dialing rules.
3.
Do either of the following:

In conventional mode, tap , and then tap
Private
.

In trunking mode, tap .
4.
Press the
PTT
key.
Through Contact List
1.
Tap or .

Hytera PDC680 Specifications

General

Brand	Hytera
Model	PDC680
Category	Radio
Language	English