29
2.
Go to
Contacts
>
Private
, and then tap a private contact.
3.
Press and hold the
PTT
key, or tap .
Through One Touch Call
With the One Touch Call feature enabled, do either of the following:
In conventional mode, press the preprogrammed
One touch call/msg
key, and then press the
PTT
key.
In trunking mode, press the preprogrammed
One touch call/msg
key.
8.1.2.2 Receiving a Private Call
Conventional Mode
You can answer a private call without any operation.
Trunking Mode
You can answer a private call according to the setup mode as follows:
Full Off Air Call Set-Up (FOACSU)
When receiving a FOACSU private call, the radio rings and vibrates. To answer the call, press the
PTT
key
within the preset time.
Off Air Call Set-Up (OACSU)
When receiving an OACSU private call, the radio can answer the call without any operation.
8.1.2.3 Ending a Private Call
Conventional Mode
A private call automatically ends when the call hang time expires.
Trunking Mode
A private call ends in one of the following cases:
The calling or called party taps or presses .
The call hang time expires.
The call duration exceeds the preset time.
The BS signal is lost.
A pre-emptive call or an emergency call occupies the channel.
With the Clear Down feature enabled, the calling or called party changes the contact.
8.1.3 All Call
Conventional Mode
An all call is a call from an individual user to all the other users on the current digital channel.