75
To initiate the feature, do either of the following:
Tap or , go to
Contacts
>
Private
, select a contact, and then tap the service.
Press the preprogrammed
One touch call/msg
key.
16.4 Remote Monitor
In conventional mode, the Remote Monitor feature allows you to remotely activate the microphone of a private
contact's radio to monitor its activities.
To initiate the feature, do either of the following:
Tap or , go to
Contacts
>
Private
, select a contact, and then tap the service.
Press the preprogrammed
One touch call/msg
key.
This feature is authorized by your dealer.
16.5 Priority Interrupt
In conventional mode, the Priority Interrupt feature allows you to manually or automatically interrupt the ongoing
call on the current channel to release it. Then you can initiate a new call or a new data service on that channel.
To manually interrupt a call, press the preprogrammed Priority interrupt key.
To automatically interrupt a call, do any of the following:
Initiate an emergency alarm service.
Initiate a callback.
Initiate an all call.
Send a short message.
This feature is authorized by your dealer.
16.6 One Touch Call/Message
The One Touch Call/Message feature allows you to quickly initiate a preset service.
The following table shows the services that can be implemented by this feature and the corresponding operations.
On a digital channel, you can do any of the following:
For call services on a digital
To Next Page
Loading...
