Hytera PDC680 User Manual

42

In the call panel, tap (speaker), (earphone), or (BT device).

Press the
pre
-programmed
Switch audio path
key.
10.4 Call Recording
You can record the current or all calls. The recorded audio files are stored to the path of recorder files.

To record the current call, in the call panel, tap .

To record all calls, tap , and then enable
Call recordings
.
10.5 Quick Dialing
You can initiate a call to the contact just by touching and holding the linked number in the
Dialer
interface.
Link the number to a contact for quick dialing by either of the following:
Method 1
1.
Tap .
2.
Tap
Quick dialing
.
3.
Select a number from 1 to 9, and then select a contact.
Method 2
1.
Tap , and then touch and hold a number.
2.
In the displayed interface, tap
Settings
.
3.
Select a number from 1 to 9, and then select a contact.
10.6 Power Level
You can set the TX power level to high or low. High power enables communications with radios far away from you
but consumes more battery power. Low power enables communications with radios close to you and saves battery
power.
To set the power level, do one of the following:

Swipe down from the top to enter the control and notification center, and then tap or .

Press the preprogrammed
Adjust power level
key.

In trunking mode, tap , and then tap
Power Level
to select
High
or
Low
.

In conventional mode, do as follows:
a. Tap or
b. Tap Zone, and then select a channel.

Hytera PDC680 Specifications

General

Brand	Hytera
Model	PDC680
Category	Radio
Language	English