– On the next window, select the Save Configuration option, then press the Enter
key.
– On the next window, select the Quit Config option, then press the Enter key.
– The following window appears.
Press 'X' to Confirm Exit,
Press 'C' to Continue
– Press the X key to return to the Nways Switch Desktop window.
– Problem solved. Return the Nways Switch administration station to the customer.
Call the Network Support Center to inform them, follow their instructions, then go
to “Leaving Procedure” on page 5-30.
MAP 0510 (continued)
5-20
2220 Setup and Service Guide
To Next Page
Loading...
