The monitoring server and portal server automatically start
after running Application Support Installer
After running the Application Support Installer the Tivoli Enterprise Monitoring
Server and Tivoli Enterprise Portal Server automatically start, even if they were not
running before the installation. The behavior is harmless and there is no
workaround currently.
Errors occur during installation of Event IBM Tivoli Monitoring
Event Forwarding tool
The product functions normally in spite of the error. Check the installation log for
more details.
One or more errors occured during the replacement of files (tecSyncAllFile1)
with files (tecSyncAllFile1).
Refer to install log for more details.
One or more errors occured during the replacement of files (tecSyncAllFile2)
with files (tecSyncAllFile)1.
Refer to install log for more details.
One or more errors occured during the replacement of files (tecSyncAllFile3)
with files (tecSyncAllFile1).
Refer to install log for more details.
.
.
.
Missing LSB tags and overrides warning message at the end
of installation
During the installation process, you might see these unexpected warning messages:
insserv: warning: script ’S02ITMAgents2’ missing LSB tags and overrides
insserv: warning: script ’ITMAgents2’ missing LSB tags and overrides
These warnings are caused by an older installer missing some tags required by the
chkconfig utility, used to manage system startup files. These warnings do not
adversely affect the installation, and can safely be ignored.
Self-describing capability
Review the self-describing agent and application support problems to learn if your
installation or configuration problem is related.
Receive a message after installing a self-describing capable
agent
After installing a self-describing capable agent, you see an error message if the
self-describing application support packages are not present on the installation
media.
Unable to install agent name support packages required for self-describing
mode. Check installation log file for more details.
You can review the details of installation failure by reading the installation main
log file. The following entries should be stored in the log file:
Unable to install agent name support packages required for self-describing mode.
Following error(s) detected:
list of error(s)
Self-describing mode for agent name is not enabled.
When the problem is fixed, reinstall agent name to enable self-describing mode.
82 IBM Tivoli Monitoring: Troubleshooting Guide
To Next Page
Loading...
Need help?
General
