Table 3-4 (Page 3 of 3). SP Checkpoints.
Checkpoint Description Action/
Possible Failing FRU
E072 Preparing to call home 1. Modem.
2. Service Processor.
3. I/O board. (See notes on 3-1.)
4. CPU Card.
E075 Entering SP menus 1. Service Processor.
2. I/O board. (See notes on 3-1.)
3. CPU Card.
E076 Leaving SP menus; attempting to
disconnect modems
1. Service Processor.
2. I/O board. (See notes on 3-1.)
3. CPU Card.
E0A0 Beginning Bring-Up Phase 1. Service Processor.
2. CPU Card.
3. I/O board. (See notes on 3-1.)
E0B0 Starting CPU BIST 1. CPU Card.
2. I/O board. (See notes on 3-1.)
3. Service Processor.
E0C0 Starting X5 BIST 1. CPU Card.
2. I/O board. (See notes on 3-1.)
3. Service Processor.
E0E0 Pulling CPU out of reset 1. CPU Card.
2. I/O board. (See notes on 3-1.)
3. Service Processor.
E0E1 Pull CPU out of reset: okay 1. CPU Card.
2. I/O board.
3. System board. (See notes on
3-1.)
4. Service Processor.
OK SP Ready Waiting for Power-On None. Normal operation.
STBY SP Ready. System was shutdown
by the operating system and is still
powered on.
This condition can be requested by
a privileged system user with no
faults. See Service Processor error
log for possible operating system
fault indications.
Chapter 3. Error Code to FRU Index 3-31
To Next Page
Loading...
Need help?
General