Set Privileged-Access Password: The privileged-access password protects against
the unauthorized starting of the system programs.
If you previously had set a privileged-access password and want to remove it, select
Remove Privileged-Access Password.
Note: If you
forget
your password, you have to shut down the computer and
remove the battery for at least 30 seconds to disable the password. See
“Battery” on page 6-38 for details.
Audio: Selecting this utility turns on or off the system tones heard at power-on
time.
Remote Initial Program Load Setup: This option allows you to enable and set
up the remote startup capability of your computer. First, you are asked to specify the
network parameters.
à ð
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
------'
===>
á
ñ
Note: Some applications may require that IP addresses contain leading zeroes for
numbers less than 100. For example, 129.132.4.20 may need to be entered as
123.132.004.020.
Chapter 5. System Management Services 5-33
To Next Page
Loading...
Need help?
General