IBM RS/6000 7025 F50 Series User Manual

Replacement
1. I/O Planar Cover
a. Place the lip at the top of the I/O planar cover over the top of the system
adapter housing. Push the bottom of the I/P planar cover in, aligning the key
on the system with the key slot on the cover. Replace the I/O planar cover.
b. Latch the cover and tighten the three screws.
6-10 Service Guide

IBM RS/6000 7025 F50 Series Specifications

General

Brand	IBM
Model	RS/6000 7025 F50 Series
Category	Server
Language	English