4. Use one finger to slightly slide the battery toward the front of the server. (The
spring mechanism behind the battery pushes it out toward you as you slide it
forward.) Use your thumb and index finger to hold the battery as it pushes out of
the socket.
Replacement
Tilt the battery so that you can insert it into the front of the socket. As you slide the
battery toward the front of the server, push it down into the socket.
Notes:
1. Be sure to tell the customer that the time and date need to be reset.
If running AIX the bootlist command may have to be run from AIX while logged in
as root, this would restore the custom boot list and allow the option of Select
Software under multiboot to start the operating system. Other parameters that
may have to be rebuilt are the IP parameters.
6-40 Service Guide
To Next Page
Loading...
