Note: In some configurations of the using-system console:
Esc and 0 = Exit
Esc and 3 = Cancel
In such configurations, however, the displayed instructions for the
function keys remain the same as those shown in the screen above.
5. Select the service aid that you require, then go to the relevant instructions in this
chapter:
“Set Service Mode Service Aid” on page 3-67
“Link Verification Service Aid” on page 3-73
“Configuration Verification Service Aid” on page 3-77
“Format Disk Service Aid” on page 3-79
“Certify Disk Service Aid” on page 3-81
3-66 Service Guide
To Next Page
Loading...
