To Next Page

To Previous Page

5. Select either the service mode or the identify function. If the original disk drive

module is to remain in service mode, you can select only the identify function

now. (Only one disk drive module at a time can be in the service mode.) The

list of pdisks appears again. The pdisk that is in identify mode is identified by a

┌──────────────────────────────────────────────────────────────────────────────────┐

│ SSA SERVICE AIDS 8238 │

│ SET SERVICE MODE 82381 │

│ SET SERVICE MODE 82382 │

│ SET SERVICE MODE 82381 │

│ SET SERVICE MODE 82382 │

│ SET SERVICE MODE 82381 │

│ │

│ Move cursor onto selection, then press Enter. │

│ │

│ {TOP} │

│ │

│ pdisk 11111111 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk1 22222222 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk2 33333333 -4-P 2 GB SSA F Physical Disk Drive │

│ > pdisk3 44444444 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk4 55555555 -4-P 2 GB SSA F Physical Disk Drive │

│ + pdisk5 66666666 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk6 77777777 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk7 88888888 -4-P 2 GB SSA F Physical Disk Drive │

│ pdisk8 99999999 -4-P 2 GB SSA F Physical Disk Drive │

│ │

│ {BOTTOM} │

│ │

│ F3=Cancel F1=Exit │

│ │

└──────────────────────────────────────────────────────────────────────────────────┘

6. Identify other disk drive modules in the same way, if required.

3-72 Service Guide

IBM RS/6000 7025 F50 Series User Manual

Questions and Answers: