location codes 3-46, 3-48
AIX 3-54
physical 3-46
ssa 3-58
locations
I/O 1-4
memory 1-6
system card 1-6
system unit 1-1
logical units (LUN) 3-61
loop
broken 3-86
configurations, SSA, invalid A-15
data paths, description of 3-62
links 3-59
SSA, rules 3-61
loops 3-60
lsattr -E -l adapter -a ucode
command 3-92
LUN (logical units) 3-61
M
maintenance analysis procedures
(MAPs) 2-1, 2-35
minimum configuration Map 2-17
power MAP 2-12
problem determination MAP 2-6
maintenance, microcode 3-92
manufacturer and plant code 3-93
MAPs (maintenance analysis
procedures)
starting 2-37
using 2-35
memory bits 3-26
memory card locations 1-6
memory hang
memory module
removal and replacement 6-29
menu inactivity B-3
menus
Certify Disk service aid 3-81
Configuration Verification service
aid 3-77
Format Disk service aid 3-79
Function Select 3-65
general user B-4
Link Verification service aid 3-73
privileged user B-6
service processor B-3
service processor call-in/call-out
setup B-16
service processor call-out policy
setup B-20
service processor customer account
setup B-21
service processor language
selection B-15
service processor reboot policy
setup B-22
service processor serial port
selection B-17
service processor serial port speed
setup B-18
service processor setup B-8
service processor system
information B-13
service processor system power
control B-12
service processor telephone
setup B-18
Set Service Mode service aid 3-67
SSA Service Aids 3-65
support menus
service processor menus B-2
service processor service
aids B-2
SMS B-2
X-4 Service Guide
To Next Page
Loading...
