IBM Storwize V7000 - Page 183

Ensure that these additional space requirements, as shown in Table 27 on page 153, are available around
the enclosures.
Table 27. Clearances
Location Additional space requirements Reason
Left and right sides 50 mm (2 in.) Cooling air flow
Back
Minimum: 100 mm (4 in.)
This is not needed for 92F models.
Cable exit
Supported drives for Storwize V7000 enclosures
Table 28 on page 153 provides drive specications for your Storwize V7000 system.
Table 28. Drive specications
Model and type 3.5-inch drives 2.5-inch drives
Storwize V7000 2076-724 or
Storwize V7000 2076-U7B
Control Enclosure with 24 2.5-
inch drive slots
-
24 dual port NVMe drives (1.92 TB,
3.84 TB, 7.68 TB, 15.36 TB), or 24
dual port FCM NVMe drives (4.8 TB,
9.6 TB, 19.2 TB)
2076-12F Expansion Enclosure
with 12 3.5-inch drive slots
3.5” 7.2 K RPM HDD 2 TB, 3 TB, 4
TB, 6 TB, 8 TB
-
2076-24F Expansion Enclosure
with 24 2.5-inch drive slots
-
• 2.5” Flash Drive 200 GB, 400 GB,
800 GB, 1.6 TB
• 2.5” 15 K RPM HDD 300 GB, 600
GB
• 2.5” 10K RPM HDD 600 GB, 900
GB, 1.2 TB, 1.8 TB
• 2.5” 7.2 K RPM HDD 1 TB, 2 TB
2076-92F Expansion Enclosure
with 92 3.5-inch drive slots
• 3.5” 7.2 K RPM 12 Gbps SAS
nearline HDD 6 TB, 8 TB, 10 TB
• 3.5” 10K RPM HDD 1.2 TB, 1.8 TB
• 3.5” 15 K RPM HDD 600 GB
• 2.5” Flash Drive 1.6 TB, 1.92 TB,
3.2 TB, 3.84 TB, 7.68 TB, 15.36
TB
Acoustical specications for NVMe drives for each Storwize V7000 enclosure
Table 29 on page 154 provides the acoustical specications for the 2076-92F SAS expansion enclosure in
accordance with ISO 9296
(1, 2, 3)
.
Important: Hearing conservation program (HCP) procedures are required for eld service personnel
servicing a 2076-92F SAS expansion enclosure.
Appendix C. Control enclosure requirements
153