Table 36. Rack space requirements for the 2076-24F , and 2076-92F expansion enclosures
Enclosure Minimum rail length Maximum rail depth
2076-12F or 2076-24F
595 mm (23.4 in.) 795 mm (31.3 in.)
2076-92F
680 mm (26.8 in.) 800 mm ( 31.5 in.)
Additional rack space requirements
Ensure that these additional space requirements, as shown in Table 37 on page 162, are available around
the enclosures.
Table 37. Clearances
Location Additional space requirements Reason
Left and right sides 50 mm (2 in.) Cooling air flow
Back
Minimum: 100 mm (4 in.)
This space is not needed for or
2076-92F models.
Cable exit
Supported drives for Storwize V7000 SAS expansion enclosures
Table 38 on page 163 provides drive speciîłcations for Storwize V7000 SAS expansion enclosures.
All drives are dual-port and hot-swappable. Drives of the same form factor and connector type can be
intermixed within an enclosure.
162
Storwize V7000 : Gen3 Quick Installation Guide for MTM 2076-724, 2076-U7B, 2076-12F, 2076-24F, and
2076-92F
To Next Page
Loading...
