Table 35. Physical characteristics of the expansion enclosures (continued)
Enclosure Height Width Depth
Maximum weight
Drive ready
(without
drive
modules)
Fully
conîłgured
(with drive
modules)
2076-92F
222.2 mm
(8.75 in.)
483 mm
(19.0 in.)
968 mm (38.1
in.)
67 kg (147.7
lb)
135 kg (297
lb)
Warning: Some racks will not provide sufîłcient space to close the rear door. and 2076-92F model
enclosures need 968 mm from the rack front post to the back of the cable management arm
(CMA). In addition, allow 905 mm from the front post to the back of the enclosure. To allow space
for the power cables, provide 60 to 70 mm from the back of the enclosure.
Figure 151 on page 161 shows the rack space requirements for the 2076-24F , and 2076-92F expansion
enclosures.
Figure 151. Rack space requirements for the 2076-24F , and 2076-92F expansion enclosures
The following table shows the rack space requirements for the expansion enclosures in tabular form.
Appendix D. SAS expansion enclosure requirements
161
To Next Page
Loading...
