5-8 TS3400 Tape Library Maintenance Information
Mechanical Maintenance
Observe the following:
• Location of the escape routes and emergency exits - keep these free of obstacles
• Keep dismounted machine components and other parts safe and inaccessible for
unauthorized persons
• Keep the equipment clean during work; clean up carefully afterward
Before and after work, remove and reinstall all safety provisions installed for
maintenance, such as:
•Covers
• Hazard alert messages
• Warning signs
• Grounding wires
Clothing must be in agreement with the following safety rules:
• No metal fasteners
• Should be close-fitting so that it cannot be caught in moving machine parts
• Buttoned or rolled up sleeves
• Place the ends of a scarf or tie into the clothing.
• For long hair, use a protection that fully covers it.
• Remove watch, rings, and jewelry.
When handling heavy components, wear safety shoes.
Refrain from any action that could endanger persons or that could damage
installations or equipment.
Safety Check
Check all guards every six months:
• Cartridge magazine interlocks
• Tape Library access
To Next Page
Loading...
Need help?
General