6-18 TS3400 Tape Library Maintenance Information
Adding a Drive Canister Shipped with Library
To install a 3592 drive canister that was shipped with this library, complete the
following steps:
1. Remove all drive cover plates ( in Figure 6-20) from the rear panel of the
library. Store the cover plate and retaining screw for future use.
Figure 6-20. Drive cover plate
2. Carefully slide the drive canister into the fixed tray assembly.
3. Hold the locking lever ( in Figure 6-21) up to ensure the tabs on both sides of
the lever clear the frame.
Figure 6-21. Front and rear view of tape drive
1
a34z0017
1
E
0
5
FC
SHORT-WAV
E
4
G
b/
S
E
C
P
ORT0P
ORT1
E
nc
3
a69m0227
1
2
3
4
To Next Page
Loading...
