IBM System Storage TS3400 Tape Library - Page 22

1-6 TS3400 Tape Library Maintenance Information
0001
At power-on initialization,
a firmware error was
detected.
Error LED
ON and
Alarm LED
ON
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
3. Confirm/Replace the power supply units (page 9-7).
4. Replace the Back Board assembly (page 9-37).
5. Replace the TS3400 Tape Library chassis (page 9-44).
0002
At power-on initialization,
a RAM (base area) error
was detected.
Error LED
ON and
Alarm LED
OFF
1. Cycle the power and try again.
2. Replace the Library Control Blade (page 9-8).
3. Confirm/Replace the power supply units (page 9-7).
4. Replace the Back Board assembly (page 9-37).
5. Replace the TS3400 Tape Library chassis (page 9-44).
0003
At power-on initialization,
a RAM (buffer area) error
was detected.
CHK 0003
0008
A usable drive could not
be detected.
CHK 0008
1. Confirm the drive connection.
2. Cycle the power and try again.
3. Replace the Library Control Blade (page 9-8).
4. Replace the drive canister (page 9-11).
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
0010
Information acquisition
from the DHCP server
failed.
None
(Error code
appears in
library log.)
1. Confirm the server settings.
2. Confirm the LAN cable connection.
3. Cycle the power and try again.
4. Replace the Library Control Blade (page 9-8).
5. Replace the TS3400 Tape Library chassis (page 9-44).
0011
Time acquisition from the
NTP server failed.
0020
Library Drive Interface
(LDI) error during SCSI
command response.
Transmit data abnormality
detected (NAK reception).
1. Confirm the drive connection.
2. Cycle the power and try again.
3. Replace the Library Control Blade (page 9-8).
4. Replace the drive canister (page 9-11).
5. Replace the Drive Docking Card (page 9-19).
6. Replace the Back Board assembly (page 9-37).
7. Replace the TS3400 Tape Library chassis (page 9-44).
0021
Library Drive Interface
(LDI) error during SCSI
command response.
Receive timeout detected
(ACK/NAK reception).
0022
Library Drive Interface
(LDI) error during SCSI
command response.
Drive offline detected.
None
(Error code
appears in
library log.)
0023
Library Drive Interface
(LDI) error during SCSI
command response.
Drive busy detected.
0024
Library Drive Interface
(LDI) error during SCSI
command response.
Drive abnormality
detected.
Table 1-1. Library error codes (continued)
Code (H) Description
Panel
Indication
Action Required