Operating PSK (Continued)
D
Functions for the PSK decoder display
Push the Mode key [RTTY/PSK] to select the PSK q
mode.
•
After the PSK mode is selected, hold down [RTTY/PSK] for
1 second to toggle between the PSK and PSK-R modes.
• “PSK” or “PSK-R” appears.
Push [DECODE](F). w
• The PSK decode screen is displayed.
• When tuned to a PSK signal, the decoded characters
are displayed in the RX contents screen.
Function Action
<MENU1>
<MENU2>
Selects the Function menu.
HOLD/
CLR
Push
Turns ON or OFF the Hold func-
tion.
• “
” is displayed and the
current screen freezes..
Hold down
Clears the displayed charac-
ters.
• While the Hold function is ON,
clears the characters and re-
leases the function.
AFC/NET
When the AFC function is OFF:
Turns ON the AFC function.
When the AFC function is ON:
• “ ” is displayed. If a PSK signal is re-
ceived within the AFC tuning range, the
decoder automatically tunes to the signal
and the frequency offset is displayed.
Push
Turns ON or OFF the NET func-
tion. ( AFC/NET OFF)
•
“ ” and “ ”are dis-
played. You can transmit on
the tuned frequency.
Hold down
Adds the offset frequency to the
operating frequency.
TX MEM Enters the PSK memory screen.
ADJ Enters the threshold level setting mode.
MAIN/
SUB
Toggles between the Main and Sub bands.
B/QPSK
Toggles between the BPSK and QPSK
modes.
31/63
Toggles between the BPSK31 and BPSK63
modes.
LOG
Enters the PSK log set screen.
• Starts/Stops making a log le, or sets the
File type or Storage media.
LOG
VIEW
Displays a log file.
• You can view the log contents.
SET Enters the PSK decode set screen.
EXPAND
Toggles between the Expanded and Normal
screens.
• The Dualwatch function should be ON when the Sub
band is selected (p. 7-10).
Push [EXIT/SET]. e
• Exits
the PSK decode screen.
[EXIT/SET]Mode keys(F) Function keys
• Fucntion menu (MENU2)
• PSK decode screen (MENU1)
To Next Page
Loading...
