Icom IC-7851 - Ime Set Screen

15-12
15
SET MODE
Date (Default: 2000)
Set the date (Year/Month/Day).
(The day of the week is automatically set.)
• Range: Year 2000–2099,
Month/Day 1-1 to 12-31
Time (Now) (Default: 0:00)
Set the current time.
(The time is displayed in the 24 hours format.)
• Sets the current time.
NTP Function (Default: ON)
Automatically obtains the current time from the NTP
server.
• OFF: Turn OFF the function.
• ON: Use the function. (The internet access is neces-
sary.)
NTP Server Address (Default: time.nist.gov)
Sets the NTP server address.
Do not change this setting, unless it is necessary.
UTC Offset (Default: ±0:00)
Sets the UTC offset time.
• Range: –14:00 to +14:00 (in ve minute steps)
CLOCK 2 Function (Default: ON)
Turns Clock 2 ON or OFF.
• OFF: Disable Clock 2.
• ON: Enable Clock 2.
CLOCK 2 UTC Offset (Default: ±0:00)
Sets the UTC offset time for Clock 2.
• Range: –14:00 to ±0.00 to +14:00
• To set the UTC time, select "±0:00."
CLOCK 2 Name (Default: UTC)
Assign the name to the CLOCK 2.
• Enter name of up to three characters.

Time set screen