ITEMS DESCRIPTIONS RANGE OR VALUE REF.
LCD Unit Bright LCD unit brightness setting. 0 (dark) to 100% (bright) range
(in 1% steps)
p. 15-10
Backlight (Switches) Switch illumination brightness setting.
Display Type Screen image type setting. A, B
Display Font Frequency readout font setting.
Basic (1), Basic (2), Basic (3),
Italic (1), Italic (2), Italic (3),
Round (1), Round (2), Round (3)
Meter Response Standard and Edgewise meter needle re-
sponse speed setting.
SLOW, MID, FAST
Meter Type (Normal Screen) Meter type setting during normal screen. Standard, Edgewise, Bar
Meter Type (Expand Screen) Meter type setting during expanded screen
or mini scope is displayed.
Edgewise, Bar
Meter Peak Hold (Bar) The meter peak hold function setting. OFF, ON
Memory Name Memory name indication setting. OFF, ON
APF-Width Popup (APF OFF
ON)
Pop-up indication setting for the APF filter
width selection.
OFF, ON
MN-Q Popup (MN OFFON)
Pop-up indication setting for the manual
notch filter width selection.
OFF, ON
Screen Saver Function Screen saver function setting. OFF, 15, 30, 60 minutes p. 15-11
Screen Saver Type Screen saver type setting.
Bounce, Rotation, Twist, Sleep
External Display External monitor use. OFF, ON
External Display Resolution Screen resolution setting for the external
monitor.
800×480, 800×600
External Display Frame Rate
Shift
Frame rate shift setting for the external
monitor.
OFF, ON
External Display Sync Pulse Synchronous pulse level setting for the ex-
ternal monitor.
L, H
Opening Message
Opening message display setting.
OFF, ON
My Call Introductory text setting for the Opening
screen.
DISPLAY SET
SET [F-7]
DISP [F-3]
To Next Page
Loading...
