Icom IC-7851 - External Display; Opening Message; Screen Saver Function

15-11
15
SET MODE
APF-Width Popup (APF OFFON)
(Default: ON)
Turns the APF filter width display ON or OFF.
MN-Q Popup (MN OFFON) (Default: ON)
Turns the notch filter bandwidth display ON or OFF.
Screen Saver Function (Default: 60 min)
Turns the screen saver function ON (Timer: 15, 30 or
60 minutes) or OFF.
Screen Saver Type (Default: Bounce)
Sets the screen saver type to Bounce, Rotation, Twist
or Sleep.
External Display (Default: OFF)
Select “ON” when using an external display.
External Display Resolution
(Default: 800x480)
Select the screen resolution of the external display.
• Options: 800×480, 800×600
External Display Frame Rate Shift
(Default: OFF)
Sets the frame rate of the external display.
• Do not change this setting, unless it is necessary.
External Display Sync Pulse (Default: H)
Sets the suitable sync pulse level for an external dis-
play to H (high) or L (low).
Opening Message (Default: ON)
Turns the opening message ON or OFF.
 Display set screen (continued)
My Call
Sets an introductory text displayed as the opening
message, up to 10 characters. (example: your call
sign)
• Usable characters:
Characters (a–z, A–Z, 0–9) and symbols (+ – , @)
• Push [EDIT](F) to enter the edit mode.
• Push [ABC] or [abc] to toggle the character type between
upper case and lower case letters.
• Push [123] or [Symbol] to toggle the character type be-
tween numbers and symbols.
• Rotate [MAIN DIAL] to select a character.
• Push [t](F) to move the cursor to the left, push [u](F) to
move the cursor right.
• Push [DEL](F) to delete the selected character.
• Push [EXIT/SET] to cancel and exit the edit mode.
• Push [SET](F) to save.