Icom IC-7851 - Functions for the Rtty Decoder Display

5-16
5
RECEIVE AND TRANSMIT
Operating RTTY (FSK) (Continued) 
D
Functions for the RTTY decoder display
Push the Mode key [RTTY/PSK] to select the RTTY q
mode.
• After the RTTY mode is selected, hold down [RTTY/PSK]
for 1 second to toggle between the RTTY and RTTY-R
modes.
• “RTTY” or “RTTY-R” appears.
Push [DECODE](F). w
• The RTTY decode screen is displayed.
• When tuned to an RTTY signal, the decoded characters
are displayed in the RX contents screen.
Function Action
<MENU1>
<MENU2>
Selects the Function menu.
HOLD/
CLR
Push
Turns ON or OFF the Hold func-
tion.
• “
” is displayed and the
current screen freezes.
Hold down
Clears the displayed charac-
ters.
• While the Hold function is ON,
clears the characters and re-
leases the function.
TX MEM Enters the RTTY memory screen.
ADJ Enters the threshold level setting mode.
MAIN/
SUB
Toggles between the Main and Sub bands.
LOG
Enters the RTTY log set screen.
• Starts/Stop making a log le, or sets the
File type or Storage media.
LOG
VIEW
Displays a log file.
• You can view the log contents.
SET Enters the RTTY decode set screen.
EXPAND
Toggles between the Expanded or Normal
screens.
• The Dualwatch function should be ON when the Sub
band is selected (p. 7-10).
Push [EXIT/SET]. e
• Exits the RTTY decode screen.
[EXIT/SET]
Mode keys
(F) Function keys
• Fucntion menu (MENU2)
• RTTY decode screen (MENU1)