Icom IC-7851 - Memory List Screen

11-3
11
MEMORY OPERATION

Memory list screen
The Memory list screen simultaneously shows 9
memory channels and their programmed contents. 15
memory channels can be displayed in the expanded
Memory list screen.
You can select a desired memory channel from the
Memory list screen.
D
Selecting a memory channel using the Memory list screen
 The Multi-function screens are OFF:
q Push [MEMORY](F).
• The Memory list screen is displayed.
• Push [EXPAND](F) to toggle between the standard and
expanded screens.
While holding down [ROLL](F), rotate [MAIN DIAL] w
to select the desired memory channel.
• M-CH [Y] or M-CH [Z] can also be used.
Push [EXIT/SET]. e
• Exits the Memory list screen.
D
Conrming programmed memory channels
q Push [MEMORY](F).
• The Memory list screen is displayed.
• Push [EXPAND](F) to toggle between the standard and
expanded screens.
w While holding down [ROLL](F), rotate [MAIN DIAL]
to scroll the screen.
e Push [SET](F) to select the highlighted memory
channel.
• “u” appears beside the selected memory channel num-
ber in the Memory list screen and the selected memory
channel contents are displayed below the frequency
readout.
r Push [EXIT/SET]
• Exits the Memory list screen.
• Memory list screen
M-CH [] or []
[V/M]
[MAIN DIAL][EXIT/SET](F) Function keys
[MAIN DIAL][EXIT/SET](F) Function keys