Icom IC-7851 - Using the Memo Pad List Screen

11-8
11
MEMORY OPERATION
• Memo pad list screen
Memo Pads
MP-R
Temporary pad
Oldest content
Newest content
MP-R
Memo pads (Continued) 
D
Calling up a frequency and operating mode from Memo pads
D
Using the Memo pad list screen
You can easily call up the desired frequency and oper-
ating mode of Memo pads by pushing [MP-R] several
times.
• The frequency and operating mode are called up, starting
from the most recently entered.
When you call up a frequency and an operating mode
from Memo pads by pushing [MP-R], the previously
displayed frequency and operating mode are automat-
ically stored in a temporary pad. The frequency and
operating mode in the temporary pad can be recalled
by pushing [MP-R] several times.
• You may think there are 6 Memo pads because 6 different
frequencies are called up by [MP-R] (5 are in Memo pads
and 1 is in the temporary pad).
Hold down [MP-R] for 1 second. q
• The Memo pad list screen is displayed.
Push [ w p](F) or [q](F) to select the desired Memo
pad.
• Hold down [DEL](F) for 1 second to delete the selected
Memo pad.
• Hold down [DEL ALL](F) for 1 second to delete all Memo
pads.
Push [EXIT/SET]. e
• Exits the Memo pad list screen.
If you change the frequency or operating mode
called up from Memo pads, the frequency and oper-
ating mode in the temporary pad are updated.
[MP-R]
[MP-R]
[MAIN DIAL]
[EXIT/SET]
(F) Function keys