7-14
7
FUNCTIONS FOR RECEIVE
Auto tuning function
When an off-frequency signal is received, the Auto
tuning function tunes the desired signal within a ±500
Hz range in the CW mode, or a ±5 kHz range in the
AM mode. This function is active only in the CW or AM
mode.
Push [AUTO TUNE] to turn ON the Auto tuning func-
tion.
• “
” blinks when the Auto tuning function is
activated.
• After 2 seconds has passed, the Auto tuning function
automatically stops tuning even it’s still off-frequency.
IMPORTANT!
When receiving a weak signal, or receiving a signal
with interference, the Auto tuning function may tune
the receiver to an undesired signal.
[AUTO TUNE] MAIN, SUB
Blinks
To Next Page
Loading...
