Icom IC-7851

5-32
5
RECEIVE AND TRANSMIT
Operating PSK (Continued) 
D
Turning ON the PSK log
Turn ON the PSK log to store your PSK operating re-
cord, both TX and RX, onto an SD card or USB flash
drive.
Be sure to insert an SD card or USB flash drive, other-
wise this function does not work.
q Display the PSK decode screen, then push
[<MENU1>](F).
DECODE [F-3]  <MENU1> [F-1]  Displays <MENU2>
• The function menu changes to Menu 2.
Push [LOG](F). w
• The PSK log set screen is displayed.
Push [ e p](F) or [q](F) to select the desired item.
• When the “PSK LOG” item is set to “ON,” the File type or
the Storage media cannot be changed. Before starting
the Log function, set these settings.
Rotate [MAIN DIAL] to select the desired setting. r
• Set the “PSK Log File Type” and “PSK Log Storage Me-
dia” items.
• Hold down [DEF](F) for 1 second to select the default
setting.
Select the “PSK Log” item, and then select “ON.” t
• To cancel the Log function, select “OFF. ”
Push [EXIT/SET]. y
• Exits the Set screen.
[EXIT/SET] [MAIN DIAL](F) Function keys
• Fucntion menu (MENU2)
PSK Log (Default: OFF)
Starts or Stops making the PSK log file.
• OFF: The PSK log function is OFF.
• ON: The PSK log is made onto an selected stor-
age media. Make the log file for each trans-
mission or reception.
PSK Log File Type (Default: Text)
Selects file type to make a log file onto a storage me-
dia in the Text or HTML format.
• Text: The PSK log is saved in the Text format.
• HTML: The PSK log is saved in the HTML format.
PSK Log Storage Media (Default: SD CARD)
Selects the Storage media between an SD card and
USB flash drive.
Displays after the PSK log starts