Setting My call sign
Your own call sign can be displayed at power ON.
[Example] Set the call sign JA3YUA.
Select the “My Call” item in the Display set screen. q
SET [F-7] DISPLAY [F-3] My Call
w Push [EDIT](F).
• A cursor blinks.
e Push [ABC]() or [123]().
• Pushing [123]() again to toggle between numbers and
symbols.
r Rotate [MAIN DIAL] to select "J."
t Push [t](F) or [u](F) to select a desired digit.
y Repeat the steps e to t to enter the call sign.
• Push [SPACE](F) to enter a space.
• Push [DEL](F) to delete the selected character.
• Holding down [DEL](F) to delete the characters to the
right of the cursor.
• Pushing 10-key, [0]~[9], can also enter numbers.
• See the table below to the right for usable characters.
The call sign can be entered from an external keyboard.
u Push [EXIT/SET].
• The call sign is saved.
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z
1 2 3 4 5 6 7 8 9 0
– / . @
• My Call setting screen
(F) Function keys [EXIT/SET] [MAIN DIAL]
To Next Page
Loading...
