About the VOX function
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your voice.
This function provides hands-free operation.
D
Turning ON the VOX function
Push the Mode key to select a phone mode (SSB, q
AM, FM).
Push [VOX/BK-IN]. w
• “VOX” is displayed and the VOX function is turned ON.
• The [VOX/BK-IN] indicator above this key lights white.
D
Adjusting the VOX function
Push the Mode key to select a phone mode (SSB, q
AM, FM).
Push [VOX/BK-IN]. w
• “VOX” is displayed and the VOX function is turned ON.
• The [VOX/BK-IN] indicator above this key lights white.
While speaking into the microphone at your normal e
voice level, rotate [VOX GAIN] to the point where the
transceiver continuously transmits.
• Higher values make the VOX function more sensitive to
your voice.
While receiving, rotate [ANTI VOX] to the point r
where the transceiver does not switch to transmit
due to sound from the speaker or other sources.
• Higher values make the VOX function less sensitive to
sound from the speaker or other sources.
Adjust the VOX delay and the VOX voice delay in the t
VOX set screen, if necessary.
To Next Page
