Electronic keyer functions (Continued)
D
Contest number set mode
This mode is used to set the Number style, Count up
trigger and Present number.
• Setting contents
The Multi-function screens are OFF:
Push [KEYER](F). q
• The Memory keyer screen is displayed.
Display the Memory keyer menu screen, then push w
[001](F).
[EXIT/SET] 001 [F-3]
• The Keyer 001 screen is displayed.
Push [ e p](F) or [q](F) to select the item.
Rotate [MAIN DIAL] to set the desired setting. r
• Hold down [DEF](F) for 1 second to select the default
setting.
Push [EXIT/SET]. t
Exits the Keyer 001 screen.
• Keyer 001 screen
Number Style (Default: Normal)
This item sets the numbering system used for contest
(serial) numbers— normal or short morse numbers.
• Normal: Does not use short morse numbers
• 190ANO: Sets 1 as A, 9 as N and 0 as O.
• 190ANT: Sets 1 as A, 9 as N and 0 as T.
• 90 NO: Sets 9 as N and 0 as O.
• 90 NT: Sets 9 as N and 0 as T.
Count Up Trigger (Default: M2)
This selects which of the four memories will contain
the contest serial number exchange. The count up trig-
ger allows the serial number to be automatically incre-
mented after each complete serial number exchange
is sent.
• Selectable memory: M1 ~ M8.
Present Number (Default: 001)
This item shows the current number for the count-up
trigger channel set above.
• Rotate [MAIN DIAL] to change the number (001 ~
9999), or hold down [001CLR](F) for 1 second to re-
set the current number to 001.
[EXIT/SET](F) Function keys
To Next Page
Loading...
