Time set mode
The IC-7851 has a built-in calendar and 24-hour clock
(accuracy of ±75 seconds per month) with daily power
ON/OFF timer functions. Before operating these tim-
ers, set the current date and time.
The Multi-function screens are OFF:
Push SET [F-7] then Time [F-5] to enter the Time q
set screen.
Push [ w p]
(F)
or [q]
(F)
to select the item.
Rotate [MAIN DIAL] to set or select the desired val- e
ue or setting.
Push [EXIT/SET] several times. r
• Exits the Time set screen.
D
Setting the Date
Sets the Date.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “Date” item.
w
Push [t u](F) to select between the Year and Month/
Day.
Rotate [MAIN DIAL] to enter the Year or Month/Day. e
• The Date setting and “DATE-set Push [SET]” blink.
Push [SET] r
(F)
to set the Date.
• “DATE-set Push [SET]” disappears.
D
Setting the Current time
Sets the local time.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “Time (Now)”
item.
Rotate [MAIN DIAL] to enter the local time. w
• The Time setting and “TIME-set Push [SET]” blink.
Push [SET](F) to set the Time. e
• “TIME-set Push [SET]” disappears.
D
Setting the UTC Offset
Set your local time offset from UTC between –14:00
and +14:00 in 5 minute steps.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “UTC Offset”
item.
Rotate [MAIN DIAL] to set the offset time. w
• Hold down [DEF](F) for 1 second to select the default
setting.
To Next Page
Loading...
