Icom IC-7851 - Etting the Sleep Timer; Imer Operation

14-6
14
CLOCK AND TIMERS

Setting the Sleep timer
The Sleep timer automatically turns OFF the transceiv-
er power after the set period ends. The timer can be
set to between 5 and 120 minutes, in 5 minute steps.
 The Multi-function screens are OFF:
Hold down [TIMER] for 1 second. q
• The Timer set screen is displayed.
Push [SLEEP](F) to enter the Sleep timer setting w
mode.
• “– – –” blinks.
Rotate [MAIN DIAL] to set the desired time period. e
• “TIMER–set Push [SET]” blinks.
• If desired, push [CLR](F) to clear the time.
• If desired, push [EXIT/SET] to cancel the setting and to
exit the Setting mode.
Push [SET](F) to save and set the timer. r
• The timer indicator above [TIMER] key lights white.
Push [EXIT/SET]. t
• Exits the Set screen.
• If desired, push [TIMER] to turn OFF the Timer func-
tion.
After the sleep timer period ends, the transceiver y
sounds 10 beeps and turns OFF .
• The timer indicator blinks while beeping.

Timer operation
 Preset the Daily timer as described above.
Push [TIMER] to turn ON the Timer function. q
• The timer indicator above this key lights white when the
function is ON.
• Push [TIMER] turns the Timer function ON or OFF.
Hold down [POWER] for 1 second to turn OFF the w
power.
• The timer indicator continuously lights.
When the set time arrives, the power is automati- e
cally turned ON.
After the power-off period ends, the transceiver r
sounds 10 beeps and turns OFF
• The timer indicator blinks while beeping.
The Daily timer action in the Timer set screen must
be set to ON to enable the timer operation, described
in page 14-5 steps e.
[POWER]
[TIMER] TIMER indicator
POWER indicator
[MAIN DIAL]
[TIMER]
(F) Function keys
• Timer screen
• When setting the Sleeping timer