Icom IC-7851 - Speech Level

15-5
 Level set screen (continued)
15
SET MODE
FM TX Tone (Bass) (Default: 0)
Sets the bass level of the transmit audio tone in the FM
mode from –5 to +5.
FM TX Tone (Treble) (Default: 0)
Sets the treble level of the transmit audio tone in the
FM mode from –5 to +5.
SSB TBW (WIDE) (Default: 100 – 2900)
Sets the transmission pass bandwidth to wide, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency: 2500, 2700, 2800 and 2900 Hz
SSB TBW (MID) (Default: 300 – 2700)
Sets the transmission pass bandwidth to mid, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency:
2500, 2700, 2800 and 2900 Hz
SSB TBW (NAR) (Default: 500 – 2500)
Sets the transmission pass bandwidth to narrow, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency:
2500, 2700, 2800 and 2900 Hz
Speech Level (Default: 50%)
Sets the voice synthesizer audio output level.
• Range: 0 to 100% (in 1% steps)
Side Tone Level (Default: 50%)
Sets the CW side tone output level.
• Range: 0 to 100% (in 1% steps)
Side Tone Level Limit (Default: ON)
Turns the CW side tone level limiting ON or OFF.
APF AF Level (Default: 0 dB)
Sets the audio level for the audio peak filter in the CW
mode.
• Range: 0 to +6 dB (in 1 dB steps)
Beep Level (Default: 50%)
Sets the beep output level.
• Range: 0 to 100% (in 1% steps)
Beep Level Limit (Default: ON)
Turns the beep output level limiting ON or OFF.
Phones Level (Default: 0)
Sets the audio output level ratio of the headphone
and internal speaker between 0.60 and 1.40, in 0.01
steps.
Phone L/R Mix (Default: OFF)
Selects the headphone audio output.
• OFF: Outputs the Main band’s audio from the left
side, and Sub band’s audio from the right
side.
• ON: Outputs the mixed audio.