• When the “CLOCK2 Function” item is selected
D
Selecting the CLOCK2 Function
Turn the clock 2 display ON or OFF. (Default: ON)
Clock 2 is convenient to display the UTC or other coun-
try’s local time.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “CLOCK2 Func-
tion” item.
Rotate [MAIN DIAL] to select the option. w
• ON: The Clock 2 time is displayed below the local time
display. (Default)
• OFF: The Clock 2 time is not displayed.
D
Setting the CLOCK2 UTC Offset
Set the desired time offset for Clock 2’s display from
UTC between –14:00 and +14:00 in 5 minute steps.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “CLOCK2 UTC
Offset” item.
Rotate [MAIN DIAL] to select the offset time. w
• Hold down [DEF](F) for 1 second to select the default
setting.
D
Entering the CLOCK2 Name
Set a three character name for Clock 2. Upper case
letters, lower case letters, numbers, some symbols,
and spaces can be used.
In the Time set screen:
Push [ q p]
(F)
or [q]
(F)
to select the “CLOCK2 Name”
item.
Push [EDIT](F) to edit the Clock 2 name. w
• The cursor under the 1st character blinks.
Edit the desired character by rotating [MAIN DIAL] e
or by pushing a keypad key for a number entry.
• Push [ABC]() or [abc]() to toggle between upper case
letters and lower case letters.
• Push [123]() or [Symbol]() to toggle between numbers
and symbols.
• Push [t](F) or [u](F) to move the cursor.
• Push [DEL](F) to delete the selected character.
• Push [SPACE](F) to input a space.
• Pushing keypad, [0]–[9], can also enter numerals.
Push [EXIT/SET] to save the name. r
• When the “CLOCK2 UTC Offset” item is selected
• When the “CLOCK2 Name” item is selected
• When editing the “CLOCK2 Name” item
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x
y z
1 2 3 4 5 6 7 8 9 0
! # $ % & \ ? ” ’ ` ^ + – / . , : ; = < > ( ) [ ] {
} | _
~
@
To Next Page
Loading...
