Icom IC-7851 - Eyer Cw-Key; Rtty Log Set; Rtty Decode Set; Sk Decode Set

2-5
2
SET MODE ITEMS
ITEMS DESCRIPTIONS RANGE OR VALUE REF.
Keyer Repeat Time Interval setting for the memory keyer trans-
mission repeat.
1 ~ 60 seconds
(in 1 second steps)
p. 5-13
Dot/Dash Ratio Dot/Dash ratio setting for ELE-KEY. 1:1:2.8 ~ 1:1:4.5
(in 0.1 steps)
Rise Time Rise time of the transmitting CW envelope
setting.
2, 4, 6, 8 milliseconds
Paddle Type Paddle polarity setting. Normal, Reverse
Keyer Type
Keyer type setting for the keyer which is con-
nected to [ELEC-KEY] on the front panel.
Straight, BUG-KEY,
ELEC-KEY
MIC Up/Down Keyer Microphone [UP]/[DN] keys to be used as a
paddle setting.
OFF, ON

KEYER CW-KEY
KEYER [F-3]

[EXIT/SET]

CW KEY [F-4]
ITEMS DESCRIPTIONS RANGE OR VALUE REF.
RTTY Log RTTY log use. OFF, ON p. 5-20
RTTY Log File Type RTTY log file saving format selection. Text, HTML
RTTY Log Storage Media Storage media selection for saving an RTTY
log file.
SD CARD, USB-Memory

RTTY LOG SET
DECODE [F-3]

<MENU1> [F-1]

LOG [F-4]
ITEMS DESCRIPTIONS RANGE OR VALUE REF.
RTTY FFT Scope Averaging
RTTY FFT scope averaging function setting. OFF, 2, 3, 4 p. 5-22
RTTY FFT Scope Waveform Col or RTTY FFT scope waveform color setting. 0~255 (in 1 digit steps)
RTTY Decode USOS RTTY decode USOS (UnShift On Space)
function setting.
OFF, ON
RTTY Decode New Line Code RTTY internal decoder new line code set-
ting.
CR, LF, CR+LF, CR+LF
RTTY Diddle RTTY diddle setting. OFF, BLANK, LTRS
RTTY TX USOS RTTY TX USOS setting. OFF, ON
RTTY Auto CR+LF by TX RTTY automatic new line code (CR+LF)
transmission setting.
OFF, ON p. 5-23
RTTY Time Stamp RTTY decode screen Time stamp setting. OFF, ON
RTTY Time Stamp (Time) Clock selection for the RTTY time stamp. Local, UTC
RTTY Time Stamp (Frequency) Frequency information stamp setting for the
RTTY time stamp.
OFF, ON
RTTY Font Color (Receive)
Text color setting for the received characters. 0~255 (in 1 digit steps)
RTTY Font Color (Transmit) Text color setting for the transmitted char-
acters.
0~255 (in 1 digit steps)
RTTY Font Color (Time Stamp) Text color setting for the time stamp. 0~255 (in 1 digit steps)
RTTY Font Color (TX Buffer) Text color setting in the TX buffer screen. 0~255 (in 1 digit steps)

RTTY DECODE SET
DECODE [F-3]

<MENU1> [F-1]

SET [F-6]