Icom IC-7851 - Sweep Speed

6-9
6
SCOPE OPERATION
D Sweep speed
Select the sweep speed to change the FFT (Fast Fou-
rier Transform) scope renew speed and the waterfall
speed.
• If you want to change only the waterfall speed, you
can select “SLOW,” “MID,” or “FAST” in the Scope set
screen.
q Display the Spectrum scope screen, then push
[<MENU1>](F).
SCOPE [F-1]  <MENU1> [F-1]  Displays <MENU2>
• The function menu changes to Menu 2.
Push [SPEED](F) several times. w
• Selectable speeds: FAST, MID, or SLOW.
• “,” “,” or “” displays FAST, MID, or SLOW.
e To exit the Spectrum scope screen, push [EXIT/SET].
• Function menu (MENU2)
• Sweep speed (FAST)
• Sweep speed (MID)
• Sweep speed (SLOW)
[EXIT/SET] [MAIN DIAL](F) Function keys
“”
“”
“”