14-5
14
CLOCK AND TIMERS
Setting the Daily timer
The transceiver automatically turns power ON and/or
OFF on the specified day and time, with the specified
frequency settings in both the Main and Sub bands.
The Multi-function screen is OFF:
Hold down [TIMER] for 1 second. q
• The Timer set screen is displayed.
Push one of [TIMER1](F) to [TIMER5](F) to select w
the desired timer.
Set the timer. e
• Push [t](F) or [u](F) to select the item.
• Rotate [MAIN DIAL] to select the option.
Item Option
ACT Select the Daily timer action of ON or OFF.
• ON: The timer is enabled.
• OFF: The timer is disabled.
DAY Select the desired day of the week.
• Select “– – –” to not specify the day of the
week. In that case, the timer functions at
next the time that is specified in the “ON”
or “OFF” item.
• To clear the day, push [CLR](F).
REPEAT Select the repeat setting ON or OFF.
• ON: The timer functions every selected
day of the week or every day.
• OFF: The timer functions only once.
After the timer is activated, the transceiver
automatically changes the “ACT” item to
OFF.
ON Set the time that the transceiver powers ON.
• When using only the Power OFF timer,
push [CLR](F) to select “– – –.”
OFF Set the time that the transceiver powers
OFF.
• When using only the Power ON timer, push
[CLR](F) to select “– – –.”
MAIN Select the Memory channel on the Main
band when the Power ON timer is activated.
• To call up the last used Main band frequen-
cy, push [CLR](F) to select “– – –.”
SUB Select the Memory channel on the Sub band
when the Power ON timer is activated.
• To call up the last used Sub band frequen-
cy, push [CLR](F) to select “– – –.”
• “TIMER-set Push [SET]” blinks.
Push [SET](F) to save and set the timer. r
• “TIMER-set Push [SET]” disappears.
• The timer indicator above the [TIMER] key lights white.
Repeat steps t w to r to set other timers, if desired.
Push [EXIT/SET]. y
• Exits the Set screen.
• Timer screen
To Next Page
Loading...
