Need help?Do you have a question about the Icom IC-7851 and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-7851 |
| Category | Transceiver |
| Language | English |
Description of the front panel controls and features of the IC-7851 transceiver.
Details of the rear panel connectors and ports for external connections and power.
Explanation of the various indicators and readouts on the transceiver's display screen.
Overview of the selectable screens from the startup screen and how to navigate them.
Details the items available within the transceiver's Setting configuration, including references.
Configuration options for the spectrum scope display, including type, color, and edge settings.
Settings for voice recording and playback functions, including auto monitor and repeat time.
Adjusts audio levels for receiver and transmitter, including filters, tone, and speech compressor settings.
Instructions for connecting the antenna to the transceiver, emphasizing the importance of antenna selection.
Instructions for connecting IC-PW1/EURO and non-Icom linear amplifiers to the transceiver.
Initial checks and control settings required before powering on the transceiver for the first time.
Procedure for turning the transceiver power ON and OFF, including indicator lights and initial screen display.
Guide to adjusting the audio output level for the speaker or headphones for comfortable listening.
How to select and use the Main and Sub bands for simultaneous monitoring or split operation.
Details on using Preamplifier, Attenuator, Notch filter, Noise blanker, Noise reduction, AGC, and Twin PBT functions.
Guide to operating in CW mode, covering tuning, audio levels, output power, and using the electric keyer.
Instructions for operating RTTY using a PC keyboard, including connecting, transmitting, and monitoring signals.
Instructions for operating PSK using a keyboard, including tuning, transmitting, and message entry.
To Next Page
