Unmounting an
SD card or USB ash drive
• When unmounting the SD card
• Unmount screen
• When unmounting the USB ash drive
• SD/USB-Memory set screen
Electrically unmounts the card or flash drive when the
power is ON.
NOTE: If you remove a card or flash drive from the
transceiver without unmounting, the data may be
corrupted or deleted.
Displays the q SD/USB-Memory set screen.
SET [F-7] SD/USB [F-7]
Hold down [UNMOUNT](F) for 1 second. w
• Opens the “UNMOUNT” window.
Push [SD](F) or [USB](F). e
• Opens a conrmation window.
• To cancel saving, push [CANCEL](F).
Push [OK](F). r
• After unmounting, returns to the SD/USB-Memory set
screen.
Remove the card or flash drive from the transceiv- t
er.
To Next Page
Loading...
