Need help?Do you have a question about the Icom IC-i7410 and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-i7410 |
| Category | Transceiver |
| Language | English |
Lists key operational and performance features of the transceiver.
Details components and controls on the front of the transceiver.
Details connectors and ports on the rear of the transceiver.
Instructions for operating the transceiver in SSB mode.
Instructions for operating the transceiver in CW mode.
Details on using the built-in electronic keyer and memory functions.
Instructions for operating the transceiver in RTTY (FSK) mode.
Instructions for operating the transceiver in AM and FM modes.
Function to compensate for off-frequency received stations.
Tool to visually check signal locations and strengths around a frequency.
Amplifies weak signals to improve S/N ratio and sensitivity.
Prevents signal distortion from very strong nearby signals.
Controls receiver gain for constant audio output level.
Selects passband width IF filters for different modes.
Switches between transmit and receive using voice.
Automatically toggles between transmit and receive during CW keying.
Increases RF output power for improved signal strength.
Sets transmit filter width to Wide, Mid, or Narrow.
Shifts transmit frequency without changing receive frequency.
Overview of memory channels and their usefulness for storing frequencies.
How to select memory channels in VFO or Memory modes.
Procedures for programming memory channels in VFO or Memory modes.
Steps to clear contents of a memory channel.
How to copy memory channel contents to VFO or other memory channels.
Overview of different scanning modes available on the transceiver.
Steps required before starting various scan types.
Pauses scans when voice components are detected.
How to connect and select antennas for the transceiver.
Instructions for operating the internal automatic antenna tuner.
Explanation of the Set mode and how to navigate its settings.
Details on adjusting audio tone settings for receive and transmit.
How to connect external equipment like PCs and TNCs.
Instructions for operating packet communications using AFSK.
Step-by-step guide to safely open the transceiver for option installation.
Instructions for installing optional 1st IF filters.
Common problems and their solutions for transceiver operation.
How to adjust the tuning dial tension for preferred feel.
Guide for approximate frequency calibration using standard signals.
Procedures for replacing internal and external fuses.
Instructions for performing partial and full CPU resets.
General technical specifications of the transceiver.
Technical specifications related to the transmitter.
Technical specifications related to the receiver.
Technical specifications for the built-in antenna tuner.
Guidelines for safe installation considering RF exposure and local regulations.
To Next Page
