Icom IC-M804 - DSC Task Mode; D Software Key Functions; D Unread List

23
6
DSC OPERATION
■ DSC Task mode
After sending or receiving a DSC call, the transceiver
enters the DSC Task mode.
The transceiver can hold only 1 task.
( Example: After transmitting an Individual call)

to the caller station in the DSC Task mode.
NOTE:
(TOT) function. After a certain period of time

transceiver automatically exits the Task mode and
returns to the Main screen.




TOT is activated.
You can set the TOT function in the Inactivity Timer
menu. (p. 56)
D Software Key functions


Function Description

mode
Push to delete the task and return to the
Main screen.
Resend Push to resend the call.

on the call type.
Function Description
Cancel Push to send a Cancel call.
Pause


Resume 
Finish
Push to exit the Distress Cancel Statement
screen.
History
Push to display the Distress Call History
screen.
ACK/


any changes.
ACK


cannot make a call.
ACK


the Voice Communication frequency.
D Unread List
If the transceiver has unread DSC calls, you can display

Unread List
.
L Push
Active
to enter the Task mode.
L Push
Info
to display the detail of the selected task.