Icom IC-M804 - Antenna; Power Source

65
8
CONNECTIONS AND INSTALLATION
■ Antenna




For details about antenna connections and
installation, see the supplied AT-141 Instruction

R DANGER HIGH RF VOLTAGE! NEVER touch



Vertical
element
AT-141
Antenna
tuner
AT-141
■ Power source



Directly connect to a 12 V or 24 V battery in your

CAUTION:
• DO NOT

• BE SURE to use a 12 V or 24 V battery,

DC power cable connection
NOTE: 
+
_
Supplied
DC power cable
Crimp
Solder
12 V or 24 V
battery
Black
Red
or
Attaching the weatherproof cap



Bend the lug
90 degrees
Weatherproof cap
Attaching the Ferrite EMI lter



NOTE: 

DC power cables
