38
DSC OPERATION
6
6
The transceiver receives Distress calls, Distress
NOTE:
has a DSC call or an unread DSC message in the
Received Call Log. (p. 46)
D
Receiving a Distress call
IMPORTANT!
Distress call reception should stop after one
have received it.
When a Distress call is received:
• The emergency alarm sounds until you turn it OFF.
• “Received Distress” is displayed.
1. Push
to turn OFF the alarm.
L
(p. 50)
After 10 seconds have passed since
screen or return to the Main screen.
2.
operation.
: Ignores the call and returns to the
Main screen.
: Puts the RX task on hold and returns
to the Main screen.
: Enters the DSC Task mode
immediately.
Rotate
• One of the Emergency Frequencies is automatically
require assistance.
•
L
functions in the DSC Task mode.
3. Push
, and then
to
return to the Main screen.
TIP:
is pushed in step 2, the
to
■ Receiving DSC calls (Distress)
To Next Page
Loading...
