Icom IC-M804 - Page 42

37
6
DSC OPERATION
■ Sending DSC calls (other)
D Sending a Test call (Continued)
6. Select “Call Frequency.”
7. Select a call frequency.
8. Push
Call
to send a Test call.
• “Transmitting Test Call” is displayed, and then
“Test Call” is displayed.
L 
functions in the DSC Task mode.
 Push
Standby Mode
, and then
OK
to
return to the Main screen.
D Sending a Test call Acknowledgment




1. 
Alarm Off
to turn OFF the alarm.
2. Push
Accept
.
• The received call’s information is displayed.
L 

Able
.
L 
Main screen, push
Ignore
.
L 
Hold
.
3. Push
ACK
.
• The Call Contents screen is displayed.
4. Confirm the contents.
5. Push
Call

6. Push
Standby Mode
, and then
OK
to
return to the Main screen.
TIP:


+
Push
Rotate
+
Push
Rotate
Rotate